Главная Быстровозводимые здания Быстровозводимые дома Контейнеры Бытовки Каркасные дома Kонтакт

Волнение день в первый 1986 году достигло 72 странах мира! ..

Быстровозводимые

Быстровозводимые дома

Контейнеры

Бытовки

Каркасные дома

Технические характеристики быстровозводимых каркасных домов

Karmod has a monthly min. 400 max. 500 building manufacturing capacity.
GENERAL SYSTEM
DESCRIPTION
Manufacturing Technology In the carrier system, S320GD+Z,+AZ Erdemir quality number:1332, S350GD+Z,+AZ Erdemir quality number:1335 and/or Erdemir quality number:1322 in accordance with DIN EN 10326 standard. 1322 dir.
Static Calculations In accordance with the suitability of the building for intended usage and required seismic and static calculations of the religion where the building is constructed, project and load values ​​specified in the standards and Turkish Standards specified in 3rd item and/or International standards, static calculations are made with Sap2000.
Heat (Climate) Calculation According to climate conditions of the zone where building is made, Outer Wall and Roof are;
Snow load 80 kg/m², changes according to assembly site
Wind Speed 90 kg/m2
Earthquake Conditions 1st Degree
Climate Conditions 3rd Regional climate conditions 
Being detailed according to Insulation Values recommended in TS 825.
According to the project, 200 kg/m2 in dynamic load and 400 kg/m2 in static load are based.
Earthquake parameter is based A0 =0.40 I=1 n= 0.3.
KARMOD HOUSING SYSTEM TS 11372 Steel Buildings - Light - Manufactured with Cold Shaped Profiles - Calculation Rules
TS 648 Steel Buildings Calculation and Manufacturing Rules
TS 6793 Usage in Housings and Public buildings, and site loads
TS 498 Calculation Values of Loads Used in Sizing of Building Elements
TS 7046 Rules For Constructions Design
TS ENV 1993–1–2 (Eurocode 3) Design of Steel Constructions Section 1–2: General rules- Structural design against fire 
TS 4561 Calculation Rules of Steel Constructions According to Plastic Theory
TS ENV 1090-1 Steel Construction Applications –Section1: General rules and rules for buildings 
TS ENV 1090-3 Steel Construction Applications – Section 3: Additional rules for high yield strength steels.
TS ENV1998-1 Eurocode 8: Designing of earthquake resistant structures-Section 1: General rules, seismic effects and the rules for buildings.
TS EN 10326 Construction Steel finished strips and plates with continuous hot dip coated-technical delivery conditions
TS EN 10327 For cold forming low-carbon steel finished strips and plates with continuous hot dip coated-technical delivery conditions
TS EN 10162 Steel profiles- Cold rolled- Technical delivery conditions- tolerances on dimensions and cross-section
TS EN 20898 Mechanical properties of fasteners
TS 3611EN 0898-2 Mechanical properties of the fasteners - Section 2: Nuts with specified test load values—Normal pitch
WALL PANELS WITH DECORATIVE SHIELDED Mechanical properties of fasteners - Section 2: Nuts with specified test load values—Normal pitch
Insulation Values Recommended according to TS825 SUPPLIED HEAT INSULATION VALUE
1 for climate Zone :0.80 W/m2K......... 0.442 W/m2K (Suitable)
2 for climate Zone :0.60 W/m2K…… 0.442 W/m2K (Suitable)
3 for climate Zone: 0.50 W/m2K......... 0.442 W/m2K (Suitable)
4 for climate Zone :0.40 W/m2K......... 0.398 W/m2K (Suitable)
Wall panels are from special twisted stainless galvanized plate and double with 8X1250X2500 dimensions 
Thickness of Outer and Inner Walls 60 mm 
Facade Lining  8 mm thickness cement bonded particleboard (CE certificated)
Heat and Sound Insulation Materials  84 mm thickness Polystyrene Foam (16kg/m3)
Fire Resistance In B1 class that is ''difficult flaming materials'' according to DIN 4102
Carrier Panel Construction It is special-shaped Galvanized H Profile
The conclusion of the static calculation is 1.2 mm.
CARRIER CONSTRUCTIONS Roof trusses, wall connection elements U - H, beams and columns are manufactured from special twisted galvanized plate
There is no corrosion as a result of sweating because of radius on the corners
A special shaped steel roof truss is placed in every 125 cm along the building
Building is removable and attachable many times for using of nuts and bolts in assembly
UNDERCOAT CONSTRUCTION (FOR DUPLEX BUILDINGS) Undercoat construction is manufactured from special shaped holder galvanized plate as twisted C
16 mm thickness holder betopan (cement bonded particleboard) is coated on the undercoat
80 mm thickness glass wool is laid on the suspended ceiling plaster board.
The carrying capacity of the undercoat is 200 kg/m²
STAIRS

Being coated with 16 mm thickness betopan material on steelwork obtained from box profiles
Stair railing is manufactures from box profiles The framework section of the stair is painted with double-layer primers and double layer paint
ROOF DETAIL Insulation Values Recommended according to TS825 SUPPLIED HEAT INSULATION VALUE
1 for climate Zone :0.50 W/m2K......... 0.440 W/m2K (Suitable)
2 for climate Zone :0.40 W/m2K…… 0.361 W/m2K (Suitable)
3 for climate Zone :0.30 W/m2K…… 0.234 W/m2K (Suitable)
4 for climate Zone :0.25 W/m2K......... 0.234 W/m2K (Suitable)
Roof Carrier System  Consist of the profiles which are manufactured from galvanized plate designed specially
Purlin Special shaped galvanized omega purlin 
Roof Coating 0.55 mm thickness painted and galvanized trapeze plate is used as roof coating
Insulation Material  80 mm thickness Glass wool (14 kg/m3) (for 1st Climate Zone)
Insulation Material  100 mm thickness Glass wool (14 kg/m3) (for 2nd Climate Zone)
Insulation Material  160 mm thickness Glass wool (14 kg/m3) (for 3rd-4th Climate Zone)
Suspended Ceiling Construction  Specially designed Omega Profiles
Rain Gutters and Eaves  Being eaves and landings which are square section PVC-based
Fringe Coating  It is special shaped culvert galvanized plate with 20 cm width
SUSPENDING CEILING 12.5 mm thickness plaster board plate is used as floor coating
12.5 mm thickness plaster board plate is used as floor coating
The connection elements of plaster board are manufactured from aluminum materials painted with electrostatic
Betopan plate is applied on floors of the wet places
WINDOWS AND TRANSOMS Type The windows are PVC EGEPEN DECEUNİNCK branded
Window Glass 4+9+4   with thermopane
Transom Glass Frosted glass with 4 mm thickness
Accessories PVC Handle, inner PVC casing



OUTER DOORS Door Dimensions 90*200  steel door (Outer doors in prefabricated houses are used steel doors.)
Door Frame Steel
Surface Coating Walnut Wood
Lock System With ball, cylindric lock and safety lock (kale brand)
Door Handle It is aluminum and painted with yellow
Hinge Special hinged
INNER DOORS Door Frame 1.2 Galvanized plate 
Surface Coating Maple (American)
Filling materials Kraft paper
Lock System Mortise-lock (kale brand)
Door Handle Made from aluminum and painted gray
Hinge With 2 painted with white and stay bolt hinged
ELECTRIC INSTALLATION Electric installation has a TSE certificate and manufactured from high quality materials
The system is laid through panel by using PVC based cable channel from the attic and the wall surface
GENERAL TSE certificated VIKO brand
Switches and Sockets TSE certificated VIKO brand
Fitting TSE certificate. Lighting fittings in living places are 32 W ring shaped fluorescent with ESPA brand. Lighting fittings in wet places are ceiling globes 60 W with ESPA brand
Fuses TSE certificated SIEMENS brand Automate
Cable Installation 250 V TSE certificated, for sockets 3x2.5 NYM and NYA cable and for switches and lighting fittings 2x1.5 NYM and NYA cables are used. VATAN or OZNUR branded.
Electric Panels will be made by Customers
Electric Installation will be made by Customers
Main Line Connection will be made by Customers
In case of using of Stove, Air Conditioning, Electric radiator, it should be specified in the project
Each heating and air conditioning element will be fed with a separate fuse line
SANITARY INSTALLATIONS Clean water installation is laid flush mounted by using TSE certificated materials
Clean water and waste water installations are taken outside of the building up to 1 m
Main line outer connections of waste water and fresh water are under the responsibility of customer
General  1st Class materials in accordance with TSE standards are used.
Vitrified Materials TSE certificated and white ware AYVIT branded.
Fittings TSE certificated and ECESAN branded.
Clean Water Pipes PPR-C pipes and pipe connections are Firat branded.
Waste Water Pipes PVC pipe and joining pieces are FIRAT branded.
Washbasins Washbasins are 45*55 dimensions and wall mounted legs.
Shower  It is acrylic shower tray with 90 cm x 90 cm dimensions.
Closet TSE certificated, wall mounted ceramic closet with Suspended reservoir
Squatting Stone TSE certificated, wall mounted ceramic squatting stone with withdrawal reservoir
Urinal TSE certificated, wall mounted ceramic urinal and urinal section
Sink  It is wooden chipboard cabinet with 100 cm x 50 cm dimensions and metallic bench.
PAINT Outer Side 2 Coats of Acrylic out side paint (colors will be selected by the customer).
Inner Side 2 Coats of Plastic paint (the colors will be selected by the customer).
Ceiling 2 Coats of Plastic paint (the colors will be selected by the customer).
Mastic is applied on connection of panel, ceiling and roof details
Outer metallic surfaces are painted with double-layer primers and double layer synthetic oil paint
GRAUND CONCRETE Ground concrete is under the responsibility of customer.
Required informations and drawings for preparing of the ground concrete are given to customer with the order
WARRANTY COVERAGE Required informations and drawings for preparing of the ground concrete are given to customer with the order

GENERAL MANUFACTURING ASSEMBLY INFORMATIONS 1 KARMOD buildings established on ground concrete are optionally removable and reassemble elsewhere
2 It can be used as an office, dining hall, dormitory, toilet / bath in the site. In regular life, it can be used as schools, health centers, hospitals, and housing.
3 KARMOD Prefabricated structures are fixed on the ground concrete with steel dowels
4 Steel columns and beams as supporting system are manufactured by using high technology roll-form machines. Since connections are made with bolts and nuts, it can be removed and reassembled repeatedly. Thanks to using galvanized materials, it has high strength against corrosion
5 The walls constituting the building are not carrier type. For that reason, there is not deformation on the walls. All loads are carried by galvanized steel H columns and beams with static calculations
6 The parts of the prefabricated building are light enough to be carried by two persons. Loading and unloading can be made by manpower
KARMOD reserves its right to make modifications on Technical Specification. No: 2710/10



© 2011 KARMOD. Все права защищены.